Pressure Reducing System:

we are manufacturing and supplying a comprehensive range of Pressure Reducing System XR (O2, N2, Ag, He, Zero Air, H2, D/A, CO2, HCL, NH3, N2O, SF6, Methane, Ethane, Propene, Clorine, Krypton, Neon, Lesar Gas etc.) Offered products are manufactured by our skilled professionals using the best technology to render maximum clients' satisfaction. In order to meet variegated demands of clients, these are made available in various customized options.

 

Features:

• Industry approved design
• Light weight
• High durability

 

Specifications:

The SEE-SGCM-02 manifold system is designed to provide a single source of supply from one cylinder bank. Although these manifolds can be used as a primary source of gas, the typical application finds this model as a high pressure back-up system for liquid or bulk tank systems in industry and medical environments

 

Design and Construction:

• Open Style manifold
• Choice of Regulators – as per customer’s requirement
• Master Shut-off Valve
• Individual Station Shut-off valves
• 5/8” BSP(F) Outlet
• Headers (7/8” Brass Pipe with Bar Stock Tees)
• 10 inch centers for Oxygen, Inert Gases & Hydrogen
• 13 inch centers for Acetylene & Fuel Gases
• Brazed construction for maximum leak prevention
• End capped to accommodate future expansion needs
• Pigtails (check valves are standard)
• 24 inch rigid for Hydrogen, Helium, & N2O
• 24 inch flexible for all other gases.
• Acetylene models equipped with flashback arrestors.
• 200 # Relief Valve to protect piping (except fuel gas)
• Right & left hand inlets available
• Wall or stand mount available

We hold expertise in offering an exclusive range of Fully Automatic Change Over Manifold System that is broadly used for two cylinder system where automatically switching over is required from one cylinder to other, when the pressure in the one cylinder is below the set pressure. Under the guidance of talented professionals, our offered system is manufactured using quality tested components in tune with predefined industry standards and norms.

Features:

• Set the outlet pressure as per requirement With outlet press Regulator
• Inlet Pressure Gauge : 2 nos. of 0 – 210 Kg Gauge
• Open outlet valve to use as per requirement
  

Setting Procedure:

• Connect both cylinders with flexible pigtails
• Open the cylinder 1 and apply the pressure of Cylinder 1 ( Line 1) to the manifold
• Set the pressure through cylinder 1 regulator ( e.g. 7 kg)
• Open the cylinder 2 and apply the pressure of cylinder 2 ( Line 2 ) to the manifold.
• Set the pressure through cylinder 2 regulator ( e..g. 6 Kg.)
• Set the outlet pressure as per requirement With outlet press Regulator
• Open outlet valve to use as per requirement
  Vent valve 1 and vent valve 2 is use to purge vent the gas Cylinder change Procedure :- if cylinder1cylinder got empty close the shutt off vale replace Cylinder with filled cylinder open the vent valve for few seconds to purge and close the valve repeat same procedure for cylinder 2 if .it get empty.

We hold expertise in offering an exclusive range of Automatic Change Over Manifold System that is broadly used for two cylinder system where automatically switching over is required from one cylinder to other, when the pressure in the one cylinder is below the set pressure. Under the guidance of talented professionals, our offered system is manufactured using quality tested components in tune with predefined industry standards and norms.

Features:

• Set the outlet pressure as per requirement With outlet press Regulator
• Inlet Pressure Gauge : 2 nos. of 0 – 210 Kg Gauge
• Open outlet valve to use as per requirement
  

Setting Procedure:

• Connect both cylinders with flexible pigtails
• Open the cylinder 1 and apply the pressure of Cylinder 1 ( Line 1) to the manifold
• Set the pressure through cylinder 1 regulator ( e.g. 7 kg)
• Open the cylinder 2 and apply the pressure of cylinder 2 ( Line 2 ) to the manifold.
• Set the pressure through cylinder 2 regulator ( e..g. 6 Kg.)
• Set the outlet pressure as per requirement With outlet press Regulator
• Open outlet valve to use as per requirement
  Vent valve 1 and vent valve 2 is use to purge vent the gas Cylinder change Procedure :- if cylinder1cylinder got empty close the shutt off vale replace Cylinder with filled cylinder open the vent valve for few seconds to purge and close the valve repeat same procedure for cylinder 2 if .it get empty

Semi-Automatic Manifold System Banking on our skilled professionals, we are engaged in manufacturing and supplying Semi-Automatic manifold system. Offered rangeis designed to provide an uninterrupted supply to any application requiring no down-time. As the primary supply is depleted a reserve supply is waiting to automatically begin service. In ahead of their final dispatch, these systems are inspected on various parameters.

 

Features:

• Precision-designed
• Enhanced durability
• Minimal maintenance

 

Specifications:

Through pressure differential the switchover takes place without interruption of service, once depleted the primary bank can be replaced and becomes the new reserve bank.

 

Design and Construction:

• Open Style manifold
• Choice of Regulators – as per customer’s requirement
• Adjustable Line Regulator (except for fuel gas)
• Master Shut-off Valve
• Individual Station Shut-off valves
• 3/4” NPT(F) Outlet
• Headers (7/8” Brass Pipe with Bar Stock Tees)
• 10 inch centers for Oxygen, Inert Gases & Hydrogen
• 13 inch centers for Acetylene & Fuel Gases
• Brazed construction for maximum leak prevention
• Low Pressure Side - Black Pipe
• End capped to accommodate future expansion needs
• Pigtails (check valves are standard)
• 24 inch rigid for Hydrogen, Helium, & N2O
• 24 inch flexible for all other gases.
• Acetylene models equipped with dry flash arrestors.
• Pressure switch port included,1/4" NPT(F)
• Wall or stand mount available
• 200 # Relief Valve to protect piping (except fuel gas)

Semi-Automatic Manifold System Banking on our skilled professionals, we are engaged in manufacturing and supplying Semi-Automatic manifold system. Offered rangeis designed to provide an uninterrupted supply to any application requiring no down-time. As the primary supply is depleted a reserve supply is waiting to automatically begin service. In ahead of their final dispatch, these systems are inspected on various parameters.

 

Features:

• Precision-designed
• Enhanced durability
• Minimal maintenance

 

Specifications:

Through pressure differential the switchover takes place without interruption of service, once depleted the primary bank can be replaced and becomes the new reserve bank.

 

Design and Construction:

• Open Style manifold
• Choice of Regulators – as per customer’s requirement
• Adjustable Line Regulator (except for fuel gas)
• Master Shut-off Valve
• Individual Station Shut-off valves
• 3/4” NPT(F) Outlet
• Headers (7/8” Brass Pipe with Bar Stock Tees)
• 10 inch centers for Oxygen, Inert Gases & Hydrogen
• 13 inch centers for Acetylene & Fuel Gases
• Brazed construction for maximum leak prevention
• Low Pressure Side - Black Pipe
• End capped to accommodate future expansion needs
• Pigtails (check valves are standard)
• 24 inch rigid for Hydrogen, Helium, & N2O
• 24 inch flexible for all other gases.
• Acetylene models equipped with dry flash arrestors.
• Pressure switch port included,1/4" NPT(F)
• Wall or stand mount available
• 200 # Relief Valve to protect piping (except fuel gas)

 

 

Request
Callback

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Production Capacity: 50 month
• Delivery Time: 1 week
• Packaging Details: Box

Mechanical Automatic Gas Change Over Manifold We are specialized in offering a world-class range of Mechanical Auto Gas Change Over. It can be used for multiple cylinders banks. Using premium quality components and ultra-modern techniques, this system is manufactured under the strict surveillance of our seasoned technocrats at our sound manufacturing unit. The provided system goes through numerous quality tests in order to ensure its functioning prior to supply at our patrons' end.

Features:

• Precisely designed
• Smooth performance
• High strength

Low Pressure Gas Alarm System Banking on our skilled professionals, we are engaged in manufacturing and supplying Semi-Automatic manifold system. Offered rangeis designed to provide an uninterrupted supply to any application requiring no down-time. As the primary supply is depleted a reserve supply is waiting to automatically begin service. In ahead of their final dispatch, these systems are inspected on various parameters.

 

Features:

• Precision-designed
• Enhanced durability
• Minimal maintenance

 

Specifications:

Through pressure differential the switchover takes place without interruption of service, once depleted the primary bank can be replaced and becomes the new reserve bank.

 

Design and Construction:

• Open Style manifold
• Choice of Regulators – as per customer’s requirement
• Adjustable Line Regulator (except for fuel gas)
• Master Shut-off Valve
• Individual Station Shut-off valves
• 3/4” NPT(F) Outlet
• Headers (7/8” Brass Pipe with Bar Stock Tees)
• 10 inch centers for Oxygen, Inert Gases & Hydrogen
• 13 inch centers for Acetylene & Fuel Gases
• Brazed construction for maximum leak prevention
• Low Pressure Side - Black Pipe
• End capped to accommodate future expansion needs
• Pigtails (check valves are standard)
• 24 inch rigid for Hydrogen, Helium, & N2O
• 24 inch flexible for all other gases.
• Acetylene models equipped with dry flash arrestors.
• Pressure switch port included,1/4" NPT(F)
• Wall or stand mount available
• 200 # Relief Valve to protect piping (except fuel gas)